GROUND MOUNTED
Lighted sign cabinet signs can be ground mounted in a variety of ways. Often termed monument, free-standing, or simply ground mounted lighted signs, these applications are typically used as primary identification for a business, organization or religious establishment.

Brick or concrete base installation If no base is in place yet, we will send you mounting diagram for the masons to use. They will install bolts per our sign pattern so that when your new sign arrives, it perfectly matches the bolt structure built into the brick or concrete base. If a base already exists, we can custom fit your new sign with the necessary mounting pattern.

Concealed pole mount with skirt Often times, 'ground mounted' signs are actually mounted on a concealed pole that is covered with what is called a 'pole skirt.' This method is illustrated above.

POLE MOUNTED
Mounting on a pole or post is one of the most common mounting methods for lighted sign cabinets. Signs bought for this purpose come equipped with center pole mounting brackets for the given pole size.

Center pole mount Your new sign will come equipped with the appropriate size center pole mounting brackets, inside the sign, that fit your sign pole size. Upon receiving your new sign, simply mount it over the pole.

Two inner post mount You can also mount your new sign onto two posts. Please indicate exact inside dimensions between the poles when placing your order to ensure proper sign dimensions are used.

Two outer post mount You can also mount your new sign between two posts. Please indicate exact inside dimensions between the poles when placing your order to ensure proper sign dimensions are used.

WALL MOUNTED
Many single faced lighed signs are mounted against a wall. That wall could be above a storefront entrance, side wall, etc. This type of mounting is very straightforward and does not require the added internal brackets that a pole mounted sign requires.

WALL MOUNTED This is very common mounting method. The sign is simply bolted onto the wall using common fastening methods. The electric is then run to the sign to finish the job. Electrical work should be performed by licensed electrian and performed to meet or exceed to local building requirements.